How to fix bootloop (software issues) in Samsung F62 ?

Some time your device may face software problems as results you will not be able to operate it. There are many causes that affect your device firmware.

Your Samsung Galaxy F62 is in bootloop because of firmware corruption, you need to fix it to start using your device.



We are going to explain all the steps, how you can repair stuck on logo by flashing official stock rom. Follow complete guide to learn that is very simple.


Samsung F62 flashing



Step 1.

Download and install Samsung usb drivers in your pc. Then restart it to complete installation.


Step 2.

Download and save Odin3 flash tool also. This tool is used to install firmware in Samsung mobile devices only.


Step 3.

Download and save flash file (firmware file) for Galaxy F62 in your pc. You need to extract this file to get stock rom. Remember, only get the original firmware for your mobile model only. You can't flash another file in your device.



  1. Launch odin3 flash tool.
  2. Click on BL and load the BL file from the file you extracted.
  3. Click on AP and load the AP file.
  4. Click on CP and load the CP file.
  5. Click on CSC and load the CSC file.
  6. Now power off your Samsung Galaxy F62.

  7. Boot in download mode by pressing volume down key and power key together. Then press volume up key to continue. If you can't go in download mode with this method then, press volume key and then insert usb cable to boot in download mode.

  8. Now click on start button.
  9. It may take some time to complete flashing, when you see pass message in odin3, you can disconnect your device.
  10. First boot may take 5-10 minutes after flashing firmware.
  11. Hang on logo will be solved by This method.



Remember before flashing.

  • Charge device battery to 50%.
  • Backup your data before flashing as it erase all data from your device completely.
  • Only download firmware for your mobile model.
  • Don't disconnect your device during flashing.
  • Use a original usb cable.
  • make sure your pc is viruses free.






Samsung F62 SM-E625F required tools for firmware installation.

Samsung usb drivers Get it
Odin3 flash tool Get it
Flash file
PDA: E625FDDU1AUD1 , CSC: E625FODM1AUD1



About Samsung Galaxy F62.

Brand Samsung
Model Galaxy F62
Ram 6GB
Rom 128GB
Processor Samsung Exynos 9825
Battery 7000 Mah
Operating system Android 11
Skin One UI 3.1
Front camera 32MP
Rear camera 64MP, 12MP, 5MP, 5MP



What to do if you face any error while flashing your mobile device ?

If you are unable to complete firmware installation or flashing stuck at middle, then you need to remember these steps.
  • Try to update your flash tool.
  • Download another firmware file or latest file for your device model.
  • Check your usb cable.
  • Check your mobile charging usb port.
  • Make sure your computer system has enough memory.
  • Try restarting your pc and flash again.
  • Keep patience.