Jio f220b boot keys to enter in edl mode

On this page your are going to know about jio f220b boot keys. Boot keys Will help your device to boot in edl (Emergency download mode) mode. Once jio f220b go to in edl mode, you can flash it by flash tool successfully.


Jio f220b boot key


What is edl mode ?

Edl mode (Emergency download mode) is boot in your mobile device by which you can install stock rom (firmware) into your device. To boot your device into edl mode, you have to press and hold some keys and then have to insert usb cable.


Jio f220b edl mode.

  • Power off jio f220b mobile or reinsert battery.
  • Now connect your usb cable to pc.
  • Press and hold * key and # key together and then insert usb cable in charging port.
  • When your jio f220b is connected in edl mode successfully then release the keys only.
  • Now you can flash or unlock your mobile.



What flash tool you can use to flash your jio f220b.

If your device stuck on logo then you need to install stock rom (firmware) into your device. You will need flash file, usb drivers and flash tool for your Lyf jio f220b. You can do this only on a pc. So you will require a pc also.

Qflash tool is the ony one you can use to flash your lyf jio f220b. Jio f220b is powered by Qualcomm CPU, so Qflash tool is best to solve software issues in your jio f220b. You can follow this guide on how to flash jio f220b.


How to solve hang on logo in jio f220b.

In some cases, if your jio f220b stuck logo then you can fix it with simple hard reset. But this method will only work in some conditions. If this method doesn't work for you then you will have to flash your device.



Remember before flashing your mobile phone.

Before you start to flash your device you must remember these things in mind.
  1. Flashing will erase all data from your device permanently.

  2. Copy your files, contacts first if you want to restore it later.

  3. Charge device battery at 50%;

  4. Only download and flash firmware file for your mobile Model only.

  5. Don't disconnect during flashing.

  6. Do all the steps carefully.