Jio F90m Flash File 100% working.
Download the latest version of jio f90m flash file (firmware) and use it to flash via flash tool. You can flash jio f90m by miracle box or qfil tool easily. You have to follow some steps to flash your jio f90m model.
How to download jio f90m flash file
To download jio f90m flash file or stock click on the download button below on this page, downloading will start automatically after a seconds.
Then save the file on your computer to load when you flash your device. Make sure you have viruses free computer system.
Download Jio F90M Flash File.
| File name : | Jio-f90m-flash-file-latest.zip |
| File size : | 482MB |
| Flash file : | Download |
Download Jio F90M Flash Tool.
| Flash tool name : | Qfil flash tool |
| Size : | 5.43MB |
| Version : | V2.0.3.5 |
| Flash tool : | Download |
Download Lyf Jio F90m usb drivers.
| Drivers name : | Qualcomm usb driver |
| Size : | 14.92MB |
| Drivers : | Download |
Lyf jio f90m boot keys.
Prsss and hold Up and down keys together and insert usb cable.
Doing this your jio f90m will go into edl mode and computer system will make a port in device manager for your your device.
Now your device is connected to pc successfully.
How to flash Lyf Jio F90m
To flash your lyf jio f90m follow the steps below.
Remember before flashing.
- Check your mobile usb port (jack), whether it is working fine or not.
- Charge your device battery at least 50% before flashing your mobile device.
- Only use original usb cable.
- Keep your pc viruses free.
- Don't remove usb cable while the flashing in progress.
Steps to flash lyf jio f90m
- Download Flash file for your jio f90m.
- Extract the file if it is compressed as in zip or tar format.
- Download and Install the jio f90m drivers on your pc for perfect communication with your device.
- Download and open the flash tool for your jio f90m mobile.
- Now select and load the flash file in flash tool.
- Power off your jio f90m mobile or reinsert the battery.
- Press and hold up and down keys together and then insert usb cable in mobile usb port.
- Your device will be connected to your pc and a port will appear in device manager in your pc.
- Now click on scan port in flash tool.
- Click on Start button and wait for the flashing completes.
- When flash is done, reinsert battery and power on your mobile.