Jio F10Q flash file 100% Working

Jio F10Q Flash File 100% working.

Here you can download the latest version of jio F10Q flash file (firmware) and use it to flash via flash tool. You can flash jio F10Q by qfil tool easily. You have to follow some steps to flash your jio F10Q model.


How to download jio F10Q flash file

To download jio F10Q flash file or stock click on the download button below on this page, downloading will start automatically after a seconds.

Save the file in your pc to load flash file in the flash tool.

Then save the file on your computer to load when you flash your device. Make sure you have viruses free computer system.

Download Jio F10Q Flash File.

File name : Jio-F10Q-flash-file-latest.zip
File size : 325MB
Flash file : Download

Download Jio F10Q Flash Tool.

Flash tool name : Qfil flash tool
Size : 5.43MB
Version : V2.0.3.5
Flash tool : Download


Download Lyf Jio F10Q usb drivers.


Drivers name : Qualcomm usb driver
Size : 14.92MB
Drivers : Download

Jio f10Q Cpu Type

Jio F10Q is powered by Qualcomm Processor.


Lyf jio F10Q boot keys.

Prsss and hold volume up and power keys together and insert usb cable. Doing this your jio F10Q will go into edl mode and computer system will make a port in device manager for your your device. Now your device is connected to pc successfully.


How to flash Lyf Jio F10Q

To flash your lyf jio F10Q follow the steps below.


Remember before flashing.

  • Check your mobile usb port (jack), whether it is working fine or not.
  • Charge your device battery at least 50% before flashing your mobile device.
  • Only use original usb cable.
  • Keep your pc viruses free.
  • Don't remove usb cable while the flashing in progress.

Steps to flash lyf jio F10Q

  • Download Flash file for your jio F10Q.
  • Extract the file if it is compressed as in zip or tar format.
  • Download and Install the jio F10Q drivers on your pc for perfect communication with your device.
  • Download and open the flash tool for your jio F10Q mobile.
  • Now select and load the flash file in flash tool.
  • Power off your jio F10Q mobile or reinsert the battery.
  • Press and hold volume up and power keys together and then insert usb cable in mobile usb port.
  • Your device will be connected to your pc and a port will appear in device manager in your pc.
  • Now click on scan port in flash tool.
  • Click on Start button and wait for the flashing completes.
  • When flash is done, reinsert battery and power on your mobile.